Xiro Xplorer - disconnect

Description of your first forum.
Post Reply
Posts: 2
Joined: Mon Feb 19, 2018 10:41 am

Xiro Xplorer - disconnect

Post by General77 » Mon Feb 19, 2018 11:17 am

I have a XIRO Xplorer dron. I have completed the Vision kit and the Range Extender.
At startup, all four green lights on the remote control light. The rear dash lights also illuminate green.
After take-off and when the drones are about 20 to 30 m long, the remote control vibrates and the second drones indicator lights up red. The rear lights on the dron instead of the green start flashing yellow and then red. Dron can be controlled. On a mobile phone in xiro, he writes the disconnet message.
Please, give me an advice
Thank you Zdenek

Posts: 1
Joined: Sat Mar 17, 2018 2:57 pm

Re: Xiro Xplorer - disconnect

Post by hery » Sat Mar 17, 2018 3:08 pm

I have the same issue.
last time flying the xplorer was one month ago and it was ok.
But today it only can fly for 10-20 meters from the remote control then lost signal.
I have updates all firmware, rebind, and calibrate all, but not solve the problem.
any advise please.

Post Reply